Correct Model Identification
Based on case architecture, dial layout, bezel screw configuration, and the specific olive-leaning green tone, this watch corresponds to:
-
IWC Ingenieur Automatic 40 – Reference IW328904
-
Stainless steel case and bracelet
-
Green embossed grid dial
This is the modern Gérald Genta–derived Ingenieur, not a vintage reissue or hybrid configuration.
Case Geometry and Finishing Priorities
The stainless steel case measures 40mm in diameter, with thickness held around 10.6mm, which is critical for the Ingenieur’s wide, flat stance. On the wrist, the watch spreads horizontally rather than stacking vertically, maintaining the original design intent.
VS Factory’s brushing is deliberate and slightly coarser than some competitors, which actually benefits long-term wear. Fine brushing often looks better in photos but ages poorly. This grain hides micro-scratches and keeps the case looking consistent over time.
Polished chamfers are narrow and functional, never decorative. The watch retains a technical, industrial presence rather than drifting toward jewelry.
The five bezel screws are evenly spaced, properly sized, and sit flush. Their alignment is correct without drawing attention to themselves, which is exactly how they should behave on an Ingenieur.
Dial Texture and Green Tone Judgment
The embossed grid-pattern dial is correctly stamped, not printed. Depth is sufficient to generate shadow without turning the dial busy or coarse.
VS chooses a muted olive-green tone, darker than APS and less vibrant than some KB executions. This is a strength. Under indoor lighting, the dial settles into a subdued green-grey that feels natural. Under daylight, it opens slightly without becoming glossy.
Applied hour markers are proportionally correct, with polished tops and evenly filled luminous material. The hands match the markers in width and finish, maintaining visual balance across the dial.
The date window at 3 o’clock is well-centered, with a properly sized aperture and clean framing. It does not interrupt the grid pattern more than necessary.
Sapphire Crystal and Indoor Reality
The watch uses a sapphire crystal with internal anti-reflective coating. Reflection control is restrained rather than aggressive. The crystal remains visible under artificial light, which aligns more closely with genuine IWC behavior than overly strong AR coatings.
This matters because excessive AR often looks impressive briefly but reveals itself over time as unnatural. VS avoids that trap.
Lume application is clean and practical. Brightness is adequate for low-light conditions, with a smooth fade rather than an abrupt drop-off.
Movement Choice and Reliability Bias
Inside is a modified Asian automatic movement based on ETA 2892 architecture, selected for slimness, stability, and predictable ownership behavior.
The genuine IW328904 uses IWC’s Calibre 32111, a torque-focused, non-decorative movement. VS does not attempt a cosmetic imitation that would compromise reliability. Instead, the movement delivers:
-
Smooth hand motion
-
Reliable date switching
-
Slim case integration
-
Stable daily timekeeping suitable for daily wear
This is a movement chosen for longevity rather than marketing language.
Integrated Bracelet and Daily Wear
The stainless steel integrated bracelet uses solid links with consistent brushing and clean edge finishing. Articulation is smooth, allowing the bracelet to sit flat and adapt naturally to wrist movement.
The bracelet feels structural rather than ornamental. Over time, it loosens slightly without developing rattle, which indicates proper tolerances rather than loose assembly.
The clasp is secure, low-profile, and comfortable under sleeves, reinforcing the watch’s suitability as a daily piece.
Where the VS Version Sits Among Other Factories
Compared to APS, VS sacrifices a bit of visual sharpness in favor of durability and tonal restraint. Compared to ZF, it feels slightly more utilitarian and less stylized. Against KB, it avoids color experimentation and focuses on coherence.
VS prioritizes wear stability over display impact. That trade-off favors owners who wear the watch repeatedly rather than rotate it for photography or short-term novelty.
Comparison With the Genuine IWC Ingenieur IW328904
| Feature | Genuine IWC IW328904 | VS Factory Super Clone |
|---|---|---|
| Case Diameter | 40mm | 40mm |
| Case Material | Stainless Steel | Stainless Steel |
| Dial | Embossed green grid | Embossed green grid |
| Crystal | Sapphire with AR | Sapphire with internal AR |
| Bezel Screws | Functional, aligned | Functional, aligned |
| Movement | IWC Cal. 32111 | Asian 2892-based automatic |
| Bracelet | Integrated steel bracelet | Integrated steel bracelet |
| Water Resistance | 100m (rated) | Daily wear resistant |
| Visual Character | Industrial, restrained | Very close match |
Who This Watch Actually Fits
This IWC Ingenieur Automatic 40 IW328904 replica suits wearers who value restraint, proportion, and long-term visual consistency. It works best as a daily watch in professional or understated environments, where excess color becomes a liability.
It is not aimed at those seeking dramatic dial behavior or exhibition mechanics. That expectation misunderstands the Ingenieur’s purpose.
Final Judgment:
The VS Factory IWC Ingenieur IW328904 green dial super clone replica succeeds by choosing stability over spectacle, and whether that choice matters depends entirely on how the watch will actually be worn.
